Proceed all commands with your PIN and Star
211 - Play the current node status, if connected play list of all connected stations.
311 - Place a random call to an IRLP node.
411, 511 - Play node Help and command list.
711 – Play announcement, if any.
811 – Play system Up-Time since last reboot.
812 – Play total number of successful IRLP and EchoLink connections since installation.
AA – Play Orlando, Florida current weather conditions.
AB – Play Orlando, Florida temperature and humidity.
747 – Play the local time.
*9 – Play the last call waiting station.
69 – Play the last 3 successful connections, or
69(0-9) – Play the last 10 or 1-9 successful connections.
66 – Call-back the last Call-waiting, else last BusyID, else last successful connection, or
66(0-9) – Call-back the last 10th or 1-9 successful connection.
Axxxx – Where xxxx is an IRLP node number, play the time at a remote IRLP node.
Bxxxx – Where xxxx is an IRLP node number, play the Status of a remote IRLP node.
Cxxxx – Where xxxx is an IRLP reflector number, play the number of connected stations on a reflector channel.
*Axxxx - Where xxxx is an IRLP node number, Play the last time a particular IRLP node connected to this node.
*Bxxxx - Where xxxx is an IRLP node number, Play the last time a particular IRLP node was called from this node.
73 - Disconnect and Drop All connections. (If there are multiple connections via EchoLink, the system relies on the individual remote stations to disconnect while leaving all others still connected. NOTE: If a Local GB3PZ-R Repeater user enters 73 while any EchoLink stations are connected, ALL connected stations will be dropped!!! Hence the EchoLink “Dropping all connections” message heard. The system will also play this message when the Last Remote EchoLink station disconnects.)
73[1-?] - Selectively disconnect only a single EchoLink station when connected to multiple EchoLink stations. I.e. 732 to disconnect the second station. Use 211 node command to obtain station order numbers.
To connect to IRLP nodes enter 1234*xxxx where 1234 is your PIN and xxxx is the node number.
To connect to Echolink nodes enter 1234*# plus node number (4,5 or 6 digits) .